◆ It is composed of two groups of narrow buffer beds. Each component can be installed separately. The assembly is simple and convenient by connecting the bolt with the intermediate frame of the belt conveyor.
◆ The cushion rollers are installed on the bed frame, which is the same as the traditional cushion roller group. It keeps the rolling friction between the cushion bed and the tape, reduces the running load of the belt conveyor and prolongs the service life of the tape and the cushion bed.
◆ Buffer roller spacing is 200 mm, when impact blanking, can effectively support the belt, improve the strength of the receiving section.
◆ The size of the bed frame refers to the design of DTII and D-YM96 idler group, which can effectively integrate with other parts of the belt conveyor and improve the operation performance of the belt conveyor.
◆ Each four groups of rollers form a narrow cushion bed frame, which has high strength and can withstand the strong impact of the upper tape material on the next tape.
◆ The two sides of the bed frame of the buffer bed are detachable. In the general reconstruction project, the bottom bed frame can be placed under the belt after removing one side frame, and can be used after assembling and restoring in place.
◆ Scope of application: Usually used in general conveying capacity, conveying system where the drop point is low and the impact is small.
◆ Suitable for bandwidth:1000-1800mm
◆ Order model:KHA03.**.1.0（Bandwidth code**：10/12/14/16/18）