◆ It is composed of two groups of roller cushioning components and three groups of buffer strip components. Each component can be installed separately and assembled easily.
◆ Buffer strip uses high resilience polyurethane elastomer material as buffer carrier and fluorine-grafted polyurethane elastomer on the contact surface of belt. It has low wear resistance and friction coefficient. It can provide comprehensive support for belt in blanking area, effectively protect belt from foreign body scratch, prevent longitudinal tear of belt, and enhance anti-spill and anti-dust effect.
◆ The cushion rollers are installed on the cushion assembly of the idler, which is the same as the traditional cushion rollers. The cushion strip assembly is arranged at intervals so as to change the sliding friction between the buffer bed and the belt into rolling friction, reduce the running load of the belt conveyor, and prolong the service life of the belt and the buffer bed.
◆ The bed bracket is made of double channel steel, which effectively improves the strength of the component and can withstand the strong impact of the upper tape material on the next tape when it falls down.
◆ The two side beds of each component of buffer bed are detachable.
◆ Buffer strip can be replaced by single strip, easy to install and disassemble.
◆ The slot angle of both sides of the bed frame can be adjusted at any angle from 20 to 35 degrees.
◆ Scope of application: Where the common conveying capacity is large and the drop point of the conveying system is high and the impact is large
◆ Suitable bandwidth:1200-2000mm
◆ Order type：KHC01. **.1.0（Bandwidth code**：12/14/16/18/20）