摩托真正高手
Products
products
Home > Products > Material Cleaning and Transporta > Belt Cleaning Box > Micro-water Conveyor Belt Cleaning Box
Micro-water Conveyor Belt Cleaning BoxOnline Inquiry
Product Description:
◆??The three-level automatic cleaning technology of return tape realizes the automatic conversion of cleaning and non-cleaning working state through synchronous lifting mechanism.
◆??High-pressure water mist system cleans the adhesive material of tape and cleans the tape more thoroughly.
◆??High-pressure air knife dries the working surface of clean tape without residual moisture.
◆??To completely solve the problem of tape deviation and environmental pollution caused by adhesive materials in the return journey of tape.

Overall schematic diagram of belt cleaning system for tape return journey
1. Cleaning box 2. Scraper 3. Electronic control cabinet
Product Parameters:
◆??Suitable bandwidth: 1000-2400 mm
◆??Order model: KWB. ** 0 (bandwidth code **: 10/12/14/16/18/20/22/24)
◆  Material dispersion
Before entering the sweeping box, a set of comb-shaped idlers with adjustable height are set up. The comb roller can disperse the material bonded to the belt, so as to facilitate further cleaning of the cleaning box.

Figure 1 - Comb idler
◆  Tape tightening
    There is a set of up-pressing idlers installed in the front section of the cleaning box, and two sets of down-pressing idlers installed in the scraper section. The idlers can achieve manual control of lifting. The standard idlers are used to tighten the belt with the adjustable mounting seat of the cleaning box, and make the belt and the sweeper scraper fit perfectly. The front ends of both sides of the cleaning box are equipped with belt guide wheels at the same time, which plays a guiding role in the deviation of the belt when entering the cleaning box.

Fig. 2- idler roller
◆  Tape cleaning
    In the cleaning box, three rows of scrapers are used to clean, the first row is made of a new type of carbide scraper, and the last two rows of scrapers are made of polyurethane material to ensure the cleaning effect. All sweepers have automatic clearance compensation function to ensure good cleaning effect.

Figure 3 - Alloy Scraper

Figure 4 - Polyurethane Scraper
◆  Blowdown device
    There are two ways of sewage disposal device: one is to use hydraulic reciprocating scraper machine to re-convey the swept material to the head funnel, so that the material can be reused. The scraper conveyor has the characteristics of small occupancy space and strong conveying capacity. Secondly, for the problems of limited field space, the scraper conveyor adopts a feeding trolley and periodically cleans up manually.
◆  Hydraulic reciprocating scraper type

◆  Product Description:
◆  Reciprocating scraper is used to push the cleaning material into the head funnel to realize automatic cleaning and avoid secondary pollution.
◆  Reciprocating scraper can be climbed on the return journey to avoid bringing back the material in the scraper machine and improve the operation efficiency.
◆  The scraper climbs and falls in a slope manner, and the movement is continuous and smooth. There is no friction between the scraper and the box, and the scraper has a long service life, and no need to replace the scraper during the whole service life.
◆  Using electro-hydraulic push rod as power device, it has large thrust and high reliability.
Modular design with equal pitch, easy to disassemble and assemble, length can be customized according to demand;
The device adopts automatic control, which saves manpower and improves the stability of the system.
◆  Feeding trolley

 
Recommend Product
摩托真正高手 2019035期3d开奖结果 重庆时时直播软件 北京11选5开奖走势 cp121新彩票走势网首页 福建11选5开奖走势图彩经网 河北时时平台 七星彩走势图新浪 广东好彩一网站 重庆时时彩有漏洞赚钱骗局 极速时时单双计划软件下载 体新福建22选5走势图 11选5任5最大遗漏 比特币分分彩真假 二分pk10怎么玩